View 74LVC27BQ_5620287.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet product speci?cation supersedes data of 1998 apr 28 2004 jan 13 integrated circuits 74lvc27 triple 3-input nor gate
2004 jan 13 2 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 features wide supply voltage range from 1.2 to 3.6 v inputs accept voltages up to 5.5 v cmos low power consumption direct interface with ttl levels output capability: standard complies with jedec standard no. 8-1a esd protection: hbm eia/jesd22-a114-a exceeds 2000 v mm eia/jesd22-a115-a exceeds 200 v. i cc category: ssi. description the 74lvc27 is a high-performance, low power, low-voltage, si-gate cmos device and superior to most advanced cmos compatible ttl families. the 74lvc27 provides the 3-input nor function. quick reference data gnd = 0 v; t amb =25 c; t r =t f 2.5 ns. notes 1. c pd is used to determine the dynamic power dissipation (p d in m w). p d =c pd v cc 2 f i n+ s (c l v cc 2 f o ) where: f i = input frequency in mhz; f o = output frequency in mhz; c l = output load capacitance in pf; v cc = supply voltage in volts; n = total load switching outputs; s (c l v cc 2 f o ) = sum of the outputs. 2. the condition is v i = gnd to v cc . symbol parameter conditions typical unit t phl /t plh propagation delay na, nb, nc to ny c l = 50 pf; v cc = 3.3 v 3.4 ns c i input capacitance 5.0 pf c pd power dissipation capacitance per gate notes 1 and 2 26 pf
2004 jan 13 3 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 function table see note 1. note 1. h = high voltage level; l = low voltage level; x = dont care. ordering information pinning input output na nb nc ny lllh xxhl xhxl hxxl type number package temperature range pins package material code 74lvc27d - 40 to +85 c 14 so14 plastic sot108-1 74lvc27db - 40 to +85 c 14 ssop14 plastic sot337-1 74lvc27pw - 40 to +85 c 14 tssop14 plastic sot402-1 74LVC27BQ - 40 to +85 c 14 dhvqfn14 plastic sot762-1 pin symbol description 1 1a data input 2 1b data input 3 2a data input 4 2b data input 5 2c data input 6 2y data output 7 gnd ground (0 v) 8 3y data output 9 3a data input 10 3b data input 11 2c data input 12 1y data output 13 1c data input 14 v cc supply voltage
2004 jan 13 4 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 handbook, halfpage mna934 1 2 3 4 5 6 7 1a 1b 2a 2b 27 2c 2y gnd v cc 1c 1y 3c 3b 3a 3y 14 13 12 11 10 9 8 fig.1 pin configuration so14 and (t)ssop14. handbook, halfpage 114 gnd (1) 1a v cc 7 2 3 4 5 6 1b 2a 2b 2c 2y 13 12 11 10 9 1c 1y 3c 3b 3a 8 gnd top view 3y mna973 fig.2 pin configuration dhvqfn14. (1) the die substrate is attached to this pad using conductive die attach material. it can not be used as a supply pin or input. handbook, halfpage mna936 1a 1b 1y 2 1 12 1c 13 2a 2b 2y 4 3 6 2c 5 3a 3b 3y 10 9 8 3c 11 fig.3 logic symbol. handbook, halfpage mna935 12 3 1 3 1 3 1 2 1 6 4 3 8 10 9 13 5 11 fig.4 logic symbol (ieee/iec).
2004 jan 13 5 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 handbook, halfpage mna937 a b c y fig.5 logic diagram (one gate).
2004 jan 13 6 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 recommended operating conditions limiting values in accordance with the absolute maximum rating system (iec 60134); voltages are referenced to gnd (ground = 0 v). notes 1. the input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. for so14 packages: above 70 c derate linearly with 8 mw/k. for ssop14 and tssop14 packages: above 60 c derate linearly with 5.5 mw/k. for dhvqfn14 packages: above 60 c derate linearly with 4.5 mw/k. symbol parameter conditions min. max. unit v cc supply voltage for maximum speed performance 2.7 3.6 v for low-voltage applications 1.2 3.6 v v i input voltage 0 5.5 v v o output voltage 0 v cc v t amb operating ambient temperature in free air - 40 +85 c t r ,t f input rise and fall times v cc = 1.2 to 2.7 v 0 20 ns/v v cc = 2.7 to 3.6 v 0 10 ns/v symbol parameter conditions min. max. unit v cc supply voltage - 0.5 +6.5 v i ik input diode current v i <0 -- 50 ma v i input voltage note 1 - 0.5 +5.5 v i ok output diode current v o >v cc or v o <0 - 50 ma v o output voltage note 1 - 0.5 v cc + 0.5 v i o output source or sink current v o = 0 to v cc - 50 ma i cc ,i gnd v cc or gnd current - 100 ma t stg storage temperature - 60 +150 c p tot power dissipation per package t amb = - 40 to +85 c; note 2 - 500 mw
2004 jan 13 7 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 dc characteristics at recommended operating conditions; voltages are referenced to gnd (ground = 0 v). note 1. all typical values are measured at v cc = 3.3 v and t amb =25 c. ac characteristics gnd = 0 v; t r =t f 2.5 ns; c l = 50 pf; r l = 500 w . note 1. the typical value is measured at v cc = 3.3 v and t amb =25 c. symbol parameter test conditions min. typ. (1) max. unit other v cc (v) t amb = - 40 to +85 c v ih high-level input voltage 1.2 v cc -- v 2.7 to 3.6 2.0 -- v v il low-level input voltage 1.2 -- gnd v 2.7 to 3.6 -- 0.8 v v oh high-level output voltage v i =v ih or v il i o = - 12 ma 2.7 v cc - 0.5 -- v i o = - 100 m a 3.0 v cc - 0.2 v cc - v i o = - 12 ma 3.0 v cc - 0.6 -- v i o = - 24 ma 3.0 v cc - 1.0 -- v v ol low-level output voltage v i =v ih or v il i o =12ma 2.7 -- 0.40 v i o = 100 m a 3.0 - gnd 0.20 v i o =24ma 3.0 -- 0.55 v i li input leakage current v i = 5.5 v or gnd 3.6 - 0.1 5 m a i cc quiescent supply current v i =v cc or gnd; i o =0 3.6 - 0.1 10 m a d i cc additional quiescent supply current per input pin v i =v cc - 0.6 v; i o =0 2.7 to 3.6 - 5 500 m a symbol parameter test conditions min. typ. (1) max. unit. waveform v cc (v) t amb = - 40 to +85 c t phl /t plh propagation delay na, nb, nc to ny see figs 6 and 7 3.0 to 3.6 - 3.4 5.9 ns 2.7 -- 7.0 ns
2004 jan 13 8 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 ac waveforms handbook, halfpage mna938 t phl t plh v m v m na, nb, nc input ny output gnd v i v oh v ol fig.6 input (na, nb and nc) to output (ny) propagation delays. v m = 1.5 v at v cc 3 2.7 v. v m = 0.5v cc at v cc < 2.7 v. v ol and v oh are the typical output voltage drop that occur with the output load. handbook, full pagewidth open gnd 50 pf 2 v cc v cc v i v o mna939 d.u.t. c l r t 500 w 500 w pulse generator s1 fig.7 load circuitry for switching times. test s1 t plh /t phl open v cc v i <2.7 v v cc 2.7 to 3.6 v 2.7 v definitions for test circuits: c l = load capacitance including jig and probe capacitance. r t = termination resistance should be equal to the output impedance z o of the pulse generator.
2004 jan 13 9 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 package outlines unit a max. a 1 a 2 a 3 b p cd (1) e (1) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 0 o o 0.25 0.1 dimensions (inch dimensions are derived from the original mm dimensions) note 1. plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 sot108-1 x w m q a a 1 a 2 b p d h e l p q detail x e z e c l v m a (a ) 3 a 7 8 1 14 y 076e06 ms-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.041 0.244 0.228 0.028 0.024 0.028 0.012 0.01 0.25 0.01 0.004 0.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale so14: plastic small outline package; 14 leads; body width 3.9 mm sot108-1
2004 jan 13 10 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 unit a 1 a 2 a 3 b p cd (1) e (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.25 0.2 7.9 7.6 1.03 0.63 0.9 0.7 1.4 0.9 8 0 o o 0.13 0.1 dimensions (mm are the original dimensions) note 1. plastic or metal protrusions of 0.25 mm maximum per side are not included. sot337-1 99-12-27 03-02-19 (1) w m b p d h e e z e c v m a x a y 1 7 14 8 q a a 1 a 2 l p q detail x l (a ) 3 mo-150 pin 1 index 0 2.5 5 mm scale ssop14: plastic shrink small outline package; 14 leads; body width 5.3 mm sot337-1 a max. 2
2004 jan 13 11 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 unit a 1 a 2 a 3 b p cd (1) e (2) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 8 0 o o 0.13 0.1 0.2 1 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 sot402-1 mo-153 99-12-27 03-02-18 w m b p d z e 0.25 17 14 8 q a a 1 a 2 l p q detail x l (a ) 3 h e e c v m a x a y 0 2.5 5 mm scale tssop14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 a max. 1.1 pin 1 index
2004 jan 13 12 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 terminal 1 index area 0.5 1 a 1 e h b unit y e 0.2 c references outline version european projection issue date iec jedec jeita mm 3.1 2.9 d h 1.65 1.35 y 1 2.6 2.4 1.15 0.85 e 1 2 0.30 0.18 0.05 0.00 0.05 0.1 dimensions (mm are the original dimensions) sot762-1 mo-241 - - - - - - 0.5 0.3 l 0.1 v 0.05 w 0 2.5 5 mm scale sot762-1 dhvqfn14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm a (1) max. a a 1 c detail x y y 1 c e l e h d h e e 1 b 26 13 9 8 7 1 14 x d e c b a 02-10-17 03-01-27 terminal 1 index area a c c b v m w m e (1) note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. d (1)
2004 jan 13 13 philips semiconductors product speci?cation triple 3-input nor gate 74lvc27 data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. 3. for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. level data sheet status (1) product status (2)(3) definition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn). definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change notification (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
? koninklijke philips electronics n.v. 2004 sca76 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors C a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com . fax: +31 40 27 24825 for sales of?ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands 613508/04/pp 14 date of release: 2004 jan 13 document order number: 9397 750 10502

▲Up To Search▲

Price & Availability of 74LVC27BQ

	To Download 74LVC27BQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .